1. Before beginning the installation, read these instructions and the enclosed driver’s WARNING NOTICE thoroughly and completely. Also affix the WARNI
Kit Box Breakdown:T422:ITEM# DESCRIPTION QTYT4SP-B
Hardware Bag Breakdown:HB-T421 Lift HardwareITEM# DESCRIPTION
FRONT :2. Place floor jack under front axle and raise vehicle. Place jack stands under frame to support vehicle. Set emergency brake and block rear wh
7. Using original bolt and nut, install front differential to new front cross member and tighten. (See Photo #6)8. Install new rear A-Arm drop crossme
11. Install driver side differential drop bracket using OEM bolts in two bottom holes. Apply loctite and torque to 70 Ft. Lbs. Use 1/2” x 1 1/2” hex b
IT422/432 Pg 718. Install new lower skid plate to both new front and rear A-Arms crossmember assemblies using 3/8” x 2” bolts, 3/8” washers (one under
If installing a Softride “System” w/ new Rear Springs, Skip To Step # 28.26. Block Installation: Place the rear lift blocks in position on the axle ma
Commentaires sur ces manuels